Solutions to your doubts are just one click away. Just select the appropriate category and ask questions. You can also reply to the answers you are already aware.
I truly welcome this superb post that you have accommodated us. I guarantee this would be valuable for the vast majority of the general population. we buy houses San Francisco
This is a great post. I like this topic.This site has lots of advantage.I found many interesting things from this site. It helps me in many ways.Thanks for posting this again. 먹튀사이트
Thanks so much for this information. I have to let you know I concur on several of the points you make here and others may require some further review, but I can see your viewpoint. Face mask
Superior post, keep up with this exceptional work. It's nice to know that this topic is being also covered on this web site so cheers for taking the time to discuss this! Thanks again and again! Outdoor sauna
Excellent to be visiting your blog again, it has been months for me. Rightly, this article that I've been served for therefore long. I want this article to finish my assignment within the faculty, and it has the same topic together with your article. Thanks for the ton of valuable help, nice share. Door Replacement Companies
I truly welcome this superb post that you have accommodated us. I guarantee this would be valuable for the vast majority of the general population. we buy houses San Francisco
This is a great post. I like this topic.This site has lots of advantage.I found many interesting things from this site. It helps me in many ways.Thanks for posting this again. 먹튀사이트
Thanks so much for this information. I have to let you know I concur on several of the points you make here and others may require some further review, but I can see your viewpoint. Face mask
Superior post, keep up with this exceptional work. It's nice to know that this topic is being also covered on this web site so cheers for taking the time to discuss this! Thanks again and again! Outdoor sauna
Excellent to be visiting your blog again, it has been months for me. Rightly, this article that I've been served for therefore long. I want this article to finish my assignment within the faculty, and it has the same topic together with your article. Thanks for the ton of valuable help, nice share. Door Replacement Companies
This was a shocking post. It has some look at here fundamental data on this subject. credit
Hi While Booting I am facing some error
Starting kernel ...
Booting Linux on physical CPU 0x0
Linux version 4.9.151-linux4sam_5.8+-04821-g708ed45-dirty (prasanth@phytec1) (g0
CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: RUGGED BOARD A5D2X
cma: Failed to reserve 64 MiB
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 16240
Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rot
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 54008K/65536K available (7168K kernel code, 215K rwdata, 1168K rodata, )
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc4800000 - 0xff800000 ( 944 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0800000 (8160 kB)
.init : 0xc0a00000 - 0xc0b00000 (1024 kB)
.data : 0xc0b00000 - 0xc0b35d08 ( 216 kB)
.bss : 0xc0b35d08 - 0xc0b6cf48 ( 221 kB)
NR_IRQS:16 nr_irqs:16 16
L2C-310 ID prefetch enabled, offset 2 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 128 kB
L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x36020000
clocksource: pit: mask: 0x7ffffff max_cycles: 0x7ffffff, max_idle_ns: 116540270s
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 214748364750s
Console: colour dummy device 80x30
Calibrating delay loop... 326.86 BogoMIPS (lpj=1634304)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x20100000 - 0x20100058
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 191s
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
AT91: PM: standby: standby, suspend: ulp0
clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: s
at_xdmac f0010000.dma-controller: 16 channels, mapped at 0xc4883000
at_xdmac f0004000.dma-controller: 16 channels, mapped at 0xc4885000
AT91: Detected SoC family: sama5d2
AT91: Detected SoC: sama5d27c 64MB SiP, revision 2
VDDANA: supplied by VDDIN_3V3
advref: supplied by VDDANA
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
at91_i2c f8028000.i2c: could not find pctldev for node /ahb/apb/pinctrl@fc03800e
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
clocksource: Switched to clocksource tcb_clksrc
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=14 max_order=14 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
JFS: nTxBlock = 421, nTxLock = 3375
io scheduler noop registered (default)
pinctrl-at91-pio4 fc038000.pinctrl: atmel pinctrl initialized
[drm] Initialized
brd: module loaded
loop: module loaded
pn54x_dev_init
atmel_usart_serial.0.auto: ttyS1 at MMIO 0xf801c000 (irq = 33, base_baud = 5125L
atmel_usart_serial.1.auto: ttyS0 at MMIO 0xf8020000 (irq = 34, base_baud = 5125L
console [ttyS0] enabled
atmel_usart_serial.2.auto: ttyS2 at MMIO 0xf8024000 (irq = 35, base_baud = 5125L
atmel_usart_serial.3.auto: ttyS3 at MMIO 0xfc008000 (irq = 39, base_baud = 5125L
atmel_usart_serial.4.auto: ttyS4 at MMIO 0xfc00c000 (irq = 40, base_baud = 5125L
atmel_qspi f0024000.spi: mx25l25645g (32768 Kbytes)
7 ofpart partitions found on MTD device f0024000.spi
Creating 7 MTD partitions on "f0024000.spi":
0x000000000000-0x000000006000 : "at91bootstrap"
0x000000006000-0x000000016000 : "bootloader env"
0x000000016000-0x000000096000 : "bootloader"
0x000000096000-0x0000000a6000 : "device tree"
0x0000000a6000-0x0000005a6000 : "kernel"
0x0000005a6000-0x0000019a6000 : "rootfs"
0x0000019a6000-0x000002000000 : "data"
atmel_spi fc018400.spi: DMA TX channel not available, SPI unable to use DMA
atmel_spi fc018400.spi: Atmel SPI Controller using PIO only
atmel_spi fc018400.spi: Using FIFO (16 data)
atmel_spi fc018400.spi: Atmel SPI Controller version 0x311 at 0xfc018400 (irq 1)
libphy: Fixed MDIO Bus: probed
CAN device driver interface
m_can fc050000.can: m_can device registered (irq=48, version=31)
libphy: MACB_mii_bus: probed
random: fast init done
Micrel KSZ8081 or KSZ8091 f8008000.ethernet-ffffffff:07: attached PHY driver [M)
macb f8008000.ethernet eth0: Cadence GEM rev 0x00020203 at 0xf8008000 irq 28 (0)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-atmel: EHCI Atmel driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-atmel: OHCI Atmel driver
at91_ohci 400000.ohci: USB Host Controller
at91_ohci 400000.ohci: new USB bus registered, assigned bus number 1
at91_ohci 400000.ohci: irq 18, io mem 0x00400000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: USB Host Controller
usb usb1: Manufacturer: Linux 4.9.151-linux4sam_5.8+-04821-g708ed45-dirty ohci_d
usb usb1: SerialNumber: at91
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver option
usbserial: USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
usbcore: registered new interface driver qcaux
usbserial: USB Serial support registered for qcaux
usbcore: registered new interface driver qcserial
usbserial: USB Serial support registered for Qualcomm USB modem
rtc rtc0: invalid alarm value: 1900-1-1 0:0:0
at91_rtc f80480b0.rtc: rtc core: registered f80480b0.rtc as rtc0
at91_rtc f80480b0.rtc: AT91 Real Time Clock driver.
i2c /dev entries driver
AT91: Starting after general reset
sama5d4_wdt f8048040.watchdog: initialized (timeout = 16 sec, nowayout = 0)
usbcore: registered new interface driver bfusb
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-at91 a0000000.sdio-host: update clk mul to 39 as gck rate is 480000000 Hz
mmc0: SDHCI controller on a0000000.sdio-host [a0000000.sdio-host] using ADMA
sdhci-at91 b0000000.sdio-host: update clk mul to 39 as gck rate is 480000000 Hz
mmc0: new high speed SDIO card at address 0001
mmc1: SDHCI controller on b0000000.sdio-host [b0000000.sdio-host] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
atmel_aes f002c000.aes: version: 0x500
atmel_aes f002c000.aes: Atmel AES - Using dma0chan0, dma0chan1 for DMA transfers
atmel_sha f0028000.sha: version: 0x510
atmel_sha f0028000.sha: using dma0chan2 for DMA transfers
atmel_sha f0028000.sha: Atmel SHA1/SHA256/SHA224/SHA384/SHA512
atmel_tdes fc044000.tdes: version: 0x703
atmel_tdes fc044000.tdes: using dma0chan3, dma0chan4 for DMA transfers
atmel_tdes fc044000.tdes: Atmel DES/TDES
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
at91-sama5d2_adc fc030000.adc: setting up trigger as external_rising
at91-sama5d2_adc fc030000.adc: version: 800
NET: Registered protocol family 10
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20161123 t)
can: netlink gateway (rev 20130117) max_hops=1
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
at91_i2c f8028000.i2c: can't get DMA channel, continue without DMA support
at91_i2c f8028000.i2c: Using FIFO (16 data)
at24 0-0050: 256 byte 24c02 EEPROM, writable, 8 bytes/write
at91_i2c f8028000.i2c: AT91 i2c bus driver (hw version: 0x704).
at91_rtc f80480b0.rtc: setting system clock to 2012-01-01 00:01:18 UTC (1325376)
ALSA device list:
No soundcards found.
mmc1: new high speed SDHC card at address aaaa
atmel_usart_serial atmel_usart_serial.1.auto: using dma0chan5 for rx DMA transfs
atmel_usart_serial atmel_usart_serial.1.auto: using dma0chan6 for tx DMA transfs
mmcblk1: mmc1:aaaa SC16G 14.8 GiB
mmcblk1: p1 p2
EXT4-fs (mmcblk1p2): mounting ext3 file system using the ext4 subsystem
EXT4-fs (mmcblk1p2): recovery complete
EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext3 filesystem) on device 179:2.
devtmpfs: error mounting -2
Freeing unused kernel memory: 1024K
Kernel panic - not syncing: No working init found. Try passing init= option to.
CPU: 0 PID: 1 Comm: swapper Not tainted 4.9.151-linux4sam_5.8+-04821-g708ed45-d5
Hardware name: Atmel SAMA5
Function entered at [<c010cdec>] from [<c010a61c>]
Function entered at [<c010a61c>] from [<c0173bf4>]
Function entered at [<c0173bf4>] from [<c070c8f8>]
Function entered at [<c070c8f8>] from [<c01075b0>]
---[ end Kernel panic - not syncing: No working init found. Try passing init= .
@Yuva Aravind V uploaded on One Drive have shared you the link